Our Products

ALUMINUM
2024 • 6061 • 7075

1) Rectangle Bar: 1/8"x1/2" thru 4"x6" (6061-T6)
    Round Bar: 1/8" thru 12" diameter
    Square Bar: 3/16" thru 6" (6061-T6)
    Hex Bar: 5/16" thru 3" (2024-T3) (6061-T6)

2) Sheet & Plate:
    2024 - .020 - 2.000"
    3003, 5052 - .020 - 1/4"
    6061 - .025 - 6.000"
    7075 - .025 - 2.000"

3) Extrude Shapes 6063-T5
    Angel: 1/2"x1/2"x1/8" thru 3"x3"x3/16"
    Channel: 2"x1"x1/8" thru 3"x3"x3/16"
    "T" Stock: 1"x1"x1/8" thru 2"x2"x1/4"

4) Extrude Shapes 6061-T6
    Angel: 1/2"x1/2"x1/8" thru 8"x8"x1/2"
    Channel: 1½" thru 12" wide
    Beam: 3" thru 6"
    Pipe: 1/2" thru 6"

5) Tubing 6063-T5, 6061-T6
    Round: 1/4" thru 8"
    Square: 1/4" thru 6"
    Rectangle: 1"x1/2"x1/8" thru 4"x6"x1/4"

6) Plate: 2024, 6061, 7075 - .190 to 6" (48x144)

7) Cast Ground Tooling Plate 1/4" thru 2" (48x144)

8) Aluminum Diamond Tread Plate
    (48x192) 1/8", 3/16", 1/14", 3/8", 1/2"

STEEL

1)  Bar: Cold Rolled C1018
     Rounds: 1/8" to 10" diameter
     Square: 1/8" to 6"
     Rectangle: 1/8"x3/8" thru 4"x6" to 2"x12"

2)  Bar: Hot Rolled
     Rounds: 1/4" to 3" diameter
     Square: 1/4" to 3"
     Rectangle: 1/8"x1/2" thru 2"x6"

3)  Sheet; Cold Rolled C1018, Mill Flat - 24 GA to 10 GA

4)  Galvanized Steel Sheet - 28 GA to 12 GA

5)  Plate: A-36 Hot Rolled
     Steel Diamond Plate
     14 GA 1/8", 3/16", 1/4", 1/2"

6)  Structural Shapes:
     Angel - Channel - Beam - Pipe (schedule 40 & 80)

7)  Tubing:
     Rounds - 1/2" to 6" square - 1/2" to 6"
     Rectangle

8)  Tool Steel (0-1) Round 1/8" thru 2"

9)  Tool Steel (A-2) Round, 1/4" thru 1½"

10) Expanded Steel Sheet: 4'x8' Sheets
     1½" - 16 GA thru 1/4" Grating

11) Perforated Sheet: 3'x7' Sheets 24 GA, 20 GA

12) Paintloc 26 GA - 16 GA

4130 STEEL
1)  4130 Sheet .032" - .250"
2)  4130 - Round 1/8" - 6"
3)  4130 Flat Bars: thicknesses 1/4" thru 1"
     width Range 1" thru 3"

4) 4130 Round Tubings
    Outer Diameter 3/8" - 2"
    Wall Thicknesses .049", .065"

4340 STEEL
Round Bar: 1/2" - 2"

STAINLESS STEEL

1) Bar: Type 303 & 304
    Round: 1/8" thru 6" diameter (303 & 304)
    Square: 1/4" thru 2" (304)
    Rectangle: 1/8"x1/2" thru 1"x6" (304)
    Rounds: 1/8" thru 2" (17-4 PH)

2) Sheet: Type 304, Type 316
    26 GA thru 10 GA

3) Plate: 3/16" thru 1/4" (Type 304)

4) Angle: 1/2"x1/2"x1/8" thru 5"x5"x3/8" (Type 304)

5) Pipe: 1/2" thru 3" (Type 304)

6) SQ Tubing: 1/2" thru 2" (Type 304)

BRASS & COPPER

BRASS-ALLOY 360, 1/2 HARD

Rounds: 1/8" thru 6" diameter
Square: 1/8" thru 4"
Rectangle: 1/8"x1/4" thru 1"x4"
Sheet & Plate: .020"x36" wide thru 1/4"

COPPER
Rounds: 1/4" thru 2" diameter
Rectangle: 3/16"x1" thru 1"x4"
Sheet: .021 thru 1/8"